Capital Safety Training - Online OSHA Courses

OSHA Courses

OSHA 10 Hour Construction Outreach Training
This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks.

Learning Outcomes:

State the purpose of the OSH Act and list the functions of OSHA
List the OSHA inspection priorities and describe the inspection process
Describe the rights and responsibilities of employers and employees under the OSHA Act
The basic requirements for proper aisle and passageway maintenance
Guidelines for identification and protection of floor opening
To understand the importance of effective egress fire protection program

Course Pre-Requisite: None

Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.

NEW! OSHA 10-Hour Construction Outreach Study Guide! This new 75 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.

Time to completion: Once you enroll in the OSHA 10 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.

Need a Certificate Now?
A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks. Laminated cards now available!

In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.

The OSHA Ten Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.

OSHA 30 Hour Construction Outreach Training
The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job.

Learning Outcomes:

Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
Implement preventative measures for accidents in their workplace (Subpart D-Occupational health and Environmental Controls)
Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
List and describe the hazards and prevalence of confined spaces

Course Pre-Requisite: None

Time to completion: Once you enroll in the OSHA 30 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.

Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour Construction Outreach DOL course completion card within 4-6 weeks.

In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.

The OSHA Thirty Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.

Pre-requisite: The OSHA 30 Hour Construction Industry Outreach Training course does not have any pre-requisites.

OSHA 30 Hour General Industry Outreach Training
The OSHA 30 Hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job.

Learning Outcomes:

State the purpose of the OSH Act and list the functions of OSHA
List the OSHA inspection priorities and describe the inspection process
Describe the rights and responsibilities of employers and employees under the OSH Act
The basic requirements for proper aisle and passageway maintenance
Guidelines for identification and protection of floor openings
To understand the importance of effective Egress fire protection program
To know the safe means of Egress to provide fire protection in emergencies from new or old buildings or structures
Outline the general requirements for general safety standards
Establish the guidelines and requirements for special purpose equipment

Course Pre-Requisite: None

Time to completion: Once you enroll in the OSHA 30 Hour General Industry Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.

Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour General Industry Outreach DOL course completion card within 4-6 weeks.

In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.

The OSHA Thirty Hour General Industry Outreach Training course has been reviewed and accepted by OSHA for online distribution.